Standard Terms and Conditions for Sale and Tolling

“Seller” means VRC TECHNOLOGIES, INC., a Texas corporation, and its applicable subsidiaries and affiliates. “Customer” means the person or entity purchasing Products from Seller or engaging Seller for toll or contract manufacturing services (“Tolling”), and such person or entity’s affiliates. “Products” refers to chemical products sold by Seller, whether or not manufactured by Seller, including chemical products manufactured by Seller for Customer pursuant to a Tolling Agreement (defined below). “T&C” means these VRC Technologies, Inc. Standard Terms and Conditions for Sale and Tolling.

1. ACCEPTANCE OF ORDERS

a. Subject only to the provisions of Section 1.b., Customer’s issuance of a purchase order, acknowledgment, portal, specifications, release, shipping instruction, or other request for Products or Tolling (each, an “Order”) is made on the basis of these T&C. Seller’s acceptance of an Order, whether express (in writing) or implicit (shipment of Products, commencement of manufacturing, or performance of services) is made subject to these T&C. Any term or condition contained in an Order that is additional to or different from these T&C is rejected and shall not apply unless expressly accepted by Seller in a written agreement signed by an authorized officer of Seller.

b. For any Tolling that is governed by a separately executed Master Services Agreement, Tolling Agreement, Contract Manufacturing Agreement, Supply Agreement, or other written agreement between Seller and Customer specifically covering the applicable services (each, a “Tolling Agreement”), the Tolling Agreement shall govern and control with respect to the Tolling, Products manufactured thereunder, Customer-owned materials, specifications, pricing, production requirements, quality requirements, risk allocation, and other matters expressly addressed in the Tolling Agreement. These T&C shall apply to such tolling transactions only to the extent that they are not inconsistent with, or expressly superseded by, the applicable Tolling Agreement. If there is a conflict between these T&C and an applicable Tolling Agreement, the Tolling Agreement shall control. A separately executed written agreement applicable to a product sale that does not constitute a Tolling Agreement shall control to the extent of any conflict with these T&C.

2. PRICES, PAYMENT AND CREDIT

Unless otherwise stated in a Written Agreement or Seller’s quotation, all prices are in U.S. dollars and exclude applicable taxes, freight, insurance, duties, and other governmental charges. Product sales are due net thirty (30) days from date of shipment/invoice. Tolling charges are due net thirty (30) days from the date of manufacture stated on the invoice. Credit is subject to Seller’s approval and may be modified, suspended, or withdrawn at any time based on Customer’s creditworthiness, payment history, or other reasonable business considerations. Seller may require advance payment, cash in advance, a deposit, a guarantee, or other security. Past-due amounts may bear a finance charge of 1.0% per month (or the maximum lawful rate, if lower) plus Seller’s storage cost(s). Customer shall reimburse Seller for costs of collection, including reasonable attorneys’ fees. Seller may suspend production or shipment while any amount is past due or Customer exceeds its approved credit limit.

3. SECURITY INTEREST

For toll or contract manufacturing, as collateral security for the payment of toll/contract manufacturing charges and accrued and unpaid finance charges (if any), Customer hereby pledges and grants to Seller a lien on and security interest in and to all of the right, title, and interest of Customer in, to, and under the Products manufactured by Seller in Tolling, and the constituent chemicals in Seller’s possession, including Customer-owned materials, wherever located, from time to time, and in all accessions thereto and replacements or modifications thereof, as well as all proceeds (including insurance proceeds) of the foregoing (the “Security Interest”). The Security Interest shall also constitute a purchase-money security interest under Chapter 9 of the Texas Uniform Commercial Code (the “UCC”) in the Products. Customer authorizes Seller to file a UCC financing statement describing the Security Interest with the Texas Secretary of State and the Secretary(ies) of State for the jurisdiction(s) where Customer was formed or incorporated and where Customer maintains an office (if they are different), as well as the real property records of the applicable counties and/or parishes.

4. TAXES

Customer shall pay all sales, use, excise, transaction, environmental, or similar taxes or charges imposed on the sale, shipment, or manufacture of Products or performance of services, other than taxes imposed on Seller’s net income. Customer shall provide valid exemption certificates when applicable and shall indemnify and hold harmless Seller from reliance upon such documentation.

5. ORDERS, FORECASTS AND DELIVERY

Customer shall provide reasonable advance notice of requested shipment dates and, for Tolling, production schedules, quantities, specifications, formulas, and required raw materials. Each shipment or Tolling batch may constitute a separate transaction. Seller may establish reasonable lead times, minimum batch quantities, and scheduling requirements. Unless otherwise agreed in writing, delivery dates are estimates and Seller shall not be liable for delay in delivery or production.

6. SHIPMENT, DELIVERY AND RISK OF LOSS

Unless otherwise agreed in writing, Products are sold FCA Seller’s facility (Incoterms® 2020), and risk of loss transfers to Customer upon delivery to the carrier or Customer’s representative at Seller’s facility. Customer is responsible for transportation, freight charges, permits, and carrier arrangements unless Seller agrees otherwise. Seller’s determination of quantity, weight, and measurements shall be conclusive absent manifest error. Customer shall promptly provide complete and accurate shipping instructions and all information required for lawful transportation of hazardous materials. Customer is responsible for, and shall hold Seller harmless from costs resulting from, carrier detention, demurrage, storage, waiting time, re-delivery, or similar charges caused by Customer, its carrier, or its failure or refusal to provide timely instructions or to receive shipment(s).

7. TOLLING

For Tolling, Customer is responsible for providing complete and accurate formulas, specifications, process requirements, information (including hazard information) regarding constituent materials (whether or not supplied by Customer), and other technical instructions required for receipt, storage, shipping and Tolling, and indemnifies and agrees to hold harmless Seller from and against damage, injury and liability resulting therefrom. Unless otherwise agreed in writing, Customer remains the owner of Customer-supplied raw materials, work-in-process, and finished Products manufactured from Customer-owned materials. Customer shall deliver such materials in suitable condition and in quantities sufficient for the agreed production schedule. Seller may reject materials that are damaged, contaminated, expired, mislabeled, nonconforming, or otherwise unsuitable for processing. Customer bears the cost of replacement, disposal, rework, or delay arising from unsuitable Customer-supplied materials or inaccurate instructions. Reasonable process loss, handling loss, or yield variation shall be treated in accordance with the applicable Written Agreement. Seller shall use commercially reasonable care in handling Customer-owned materials while in Seller’s possession.

8. SPECIFICATIONS, QUALITY AND INSPECTION

Seller warrants as follows: (a) Tolling Products will be manufactured in substantial conformity with Customer’s instructions and specifications, subject to reasonable manufacturing tolerances; and (b) all other Products manufactured and sold by Seller will conform, at the time of shipment, to Seller’s standard specifications or the mutually agreed written specifications applicable to the Products. Customer shall inspect Products promptly after delivery and notify Seller in writing of any alleged shortage, visible damage, or nonconformity within ten (10) days after delivery, and of any latent nonconformity promptly after discovery. Failure to provide timely notice constitutes acceptance of the Products to the extent permitted by law.

9. DISCLAIMER OF WARRANTIES

Customer is responsible for determining the suitability of Products for its intended use, including use in agricultural, oil & gas, industrial, or other applications, and for conducting its own testing and regulatory review. EXCEPT FOR THE EXPRESS WARRANTIES STATED IN THESE T&C OR A WRITTEN AGREEMENT SIGNED BY CUSTOMER AND SELLER, SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, FITNESS FOR CUSTOMER’S PARTICULAR PROCESS OR APPLICATION, OR NON-INFRINGEMENT.

10. CLAIMS AND EXCLUSIVE REMEDY

Unless a Toll Agreement provides otherwise, Customer’s exclusive remedy for Products that do not conform to an applicable warranty or agreed specification, at Seller’s option, shall be (a) replacement of the nonconforming Product, (b) reprocessing or reasonable correction of the affected Product, or (c) refund or credit of the purchase price or toll charge attributable to the affected Product. Customer shall not return Product without Seller’s prior written authorization. No claim shall be valid to the extent the alleged nonconformity results from improper storage, transportation after risk of loss passed, handling, blending, use, alteration, contamination, processing by Customer or a third party, or is raised outside the timeframe specified above.

11. HAZARDOUS MATERIALS; REGULATORY COMPLIANCE

Customer acknowledges that chemical Products may be hazardous and that safe handling, storage, transportation, use, and disposal require appropriate precautions. Customer shall review and comply with applicable Safety Data Sheets (“SDS”), labels, warnings, and handling instructions and shall comply with all applicable federal, state, and local laws and regulations governing its receipt, storage, transportation, use, resale, and disposal of Products. Customer shall provide Seller with accurate hazard classifications and all required information concerning Customer-supplied materials and materials required pursuant to Customer’s Tolling specifications. Each party shall comply with laws applicable to its own operations, including environmental, occupational safety, transportation, and chemical-control requirements.

12. INDEMNIFICATION

Customer indemnifies and shall defend (with counsel selected by Seller) and hold harmless Seller and its affiliates, officers, employees, agents, and representatives from claims, losses, liabilities, damages, penalties, costs, and reasonable attorneys’ fees arising out of (a) Customer’s breach of these T&C; (b) Customer’s specifications, formulas, instructions, and Customer-supplied materials; (c) Customer’s storage, transportation, resale, handling, processing, use, or disposal of Products after risk of loss passes to Customer; (d) Customer’s violation of applicable law; and/or (e) claims arising from Customer’s products or applications, except to the extent caused by Seller’s gross negligence or willful misconduct. Seller shall indemnify Customer for third-party claims to the extent directly caused by Seller’s gross negligence or willful misconduct in performing its obligations hereunder, subject to the limitations in these T&C.

13. LIMITATION OF LIABILITY

TO THE MAXIMUM EXTENT PERMITTED BY LAW, SELLER SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, PUNITIVE, OR INDIRECT DAMAGES, INCLUDING LOST PROFITS, LOST REVENUE, BUSINESS INTERRUPTION, LOSS OF PRODUCTION, OR LOSS OF GOODWILL, ARISING OUT OF OR RELATING TO THE SALE OF PRODUCTS OR TOLLING, EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SELLER’S AGGREGATE LIABILITY ARISING OUT OF A TRANSACTION SHALL NOT EXCEED THE AMOUNT PAID TO SELLER FOR THE SPECIFIC PRODUCTS OR TOLLING GIVING RISE TO THE CLAIM.

14. FORCE MAJEURE

Neither Customer nor Seller shall be liable for delay or failure to perform caused by events beyond its reasonable control, including acts of God, fire, flood, unforeseeable adverse weather, epidemic or pandemic, war, terrorism, civil disturbance, shortage or interruption of raw materials or energy, or other causes beyond the affected party’s reasonable control, third-party labor disputes or third-party equipment failure, and governmental action, transportation interruption, or utility failure to the extent unrelated to the conduct of such party. The affected party shall use commercially reasonable efforts to mitigate the effects of the event. Seller may allocate available Products, manufacturing capacity, raw materials, or transportation among its customers in a fair and reasonable manner. Customer remains obligated to pay for Products delivered and accepted prior to the force majeure event.

15. CUSTOMER PROPERTY; CONFIDENTIALITY AND INTELLECTUAL PROPERTY

Customer retains ownership of Customer’s confidential information, formulas, specifications, trademarks, and other intellectual property supplied to Seller solely for the purpose of performing under the parties’ agreement(s). Seller retains ownership of its pre-existing intellectual property, manufacturing know-how, processes, methods, equipment designs, and general technical knowledge. Neither party shall disclose the other party’s confidential information except as required to perform its obligations or by law. Nothing herein transfers ownership of a party’s intellectual property. Customer represents that it has the right to provide all formulas, specifications, materials, and intellectual property supplied to Seller and grants Seller the limited license and right to use them to fulfill an Order.

16. INSURANCE

Each party shall maintain insurance appropriate to the nature and scope of its operations and obligations under the applicable transaction, including commercially reasonable general liability coverage. For Tolling, Seller will cover Customer-supplied raw materials, work-in-process, and finished Products manufactured from Customer-owned materials under Seller’s general liability coverage. Customer is advised to insure Customer-supplied raw materials, work-in-process, and finished Products manufactured from Customer-owned materials under Customer’s own policies of casualty insurance at all times. Upon reasonable request, a party shall provide evidence of applicable insurance coverage. Nothing in this provision increases either party’s liability beyond the limitations stated herein.

17. CREDIT DEFAULT; SUSPENSION AND TERMINATION

If Customer fails to make payment when due, becomes insolvent, files or has filed against it a bankruptcy proceeding that is not dismissed within the applicable statutory period, makes an assignment for the benefit of creditors, or materially breaches these T&C or a separate agreement signed by Customer and Seller, Seller may, in addition to and without limiting other remedies, suspend shipments or production, require cash in advance, reduce or terminate credit, and/or terminate unfulfilled Orders upon written notice to Customer. Termination shall not relieve Customer of payment obligations for Products manufactured, delivered, or committed before termination or of obligations that by their nature survive termination.

18. GOVERNING LAW; DISPUTES

These T&C and each transaction governed by them shall be governed by the laws of the State of Texas, without regard to conflict-of-law principles. The parties shall first attempt in good faith to resolve any dispute through discussions between authorized representatives. If a dispute is not resolved within thirty (30) days after written notice of the dispute, either party may pursue the remedies available in a court of competent jurisdiction located in Harris County, Texas. Each party waives any objection based on venue or inconvenient forum to such jurisdiction, to the extent permitted by law.

19. NO ASSIGNMENT

Customer may not assign, delegate, or transfer any order, account, or agreement governed by these T&C without Seller’s prior written consent, except in connection with a merger or sale of substantially all of Customer’s assets, provided the assignee assumes all obligations. Seller may assign its rights or obligations to an affiliate or successor in connection with a merger, reorganization, or sale of substantially all of the applicable business or assets. Any prohibited assignment is void to the extent permitted by law.

20. WAIVER; SEVERABILITY; SURVIVAL

No waiver of any breach shall constitute a waiver of any subsequent breach. If any provision is determined to be invalid or unenforceable, the remaining provisions shall remain in effect and the invalid provision shall be modified to the minimum extent necessary to make it enforceable where permitted by law. Provisions concerning payment, confidentiality, intellectual property, indemnification, limitations of liability, dispute resolution, and any other provisions that by their nature should survive shall survive completion or termination of the applicable transaction. Waiver is only enforceable against Seller if in writing and signed by an authorized officer of Seller.

21. ENTIRE AGREEMENT; ORDER OF PRECEDENCE

These T&C, together with an Agreement and any applicable quotation/proposal, Order, Order confirmation, specifications, constitute the agreement of Customer and Seller governing the a transaction. For Tolling subject to a Tolling Agreement, the Tolling Agreement shall govern and control to the extent of any conflict with these T&C, and these T&C shall supplement the Tolling Agreement only with respect to matters not addressed in the Tolling Agreement. For product sales not subject to a Tolling Agreement, the following order of precedence applies: (1) a mutually signed Written Agreement; (2) a mutually signed amendment or special terms; (3) Seller’s written quotation or order confirmation; and (4) these T&C. Customer purchase-order terms shall not modify these T&C or any applicable Tolling Agreement unless expressly accepted by Seller in a writing signed by an authorized Seller representative.


Standard Terms and Conditions for Purchase

Pursuant to Purchase Order Issued by VRC Technologies, Inc.

These Standard Terms and Conditions for Sale and Purchase Pursuant to Purchase Order Issued by VRC Technologies, Inc. (these “T&C”) govern the purchase of Products by VRC TECHNOLOGIES, INC., a Texas corporation, and its applicable affiliates from the supplier identified on Buyer’s PO.

For purposes of these T&C:

  • “Buyer” means VRC TECHNOLOGIES, INC. and, where applicable, its affiliates identified in a Purchase Order.
  • “Supplier” means the person or entity identified as the supplier on a Purchase Order.
  • “Products” means all chemical raw materials, ingredients, intermediates, finished chemicals, resale products, packaging and other goods purchased by Buyer from Supplier.
  • “Purchase Order” or “PO” means Buyer’s written or electronic purchase order, release, schedule, or other authorized purchasing document.
  • “Written Agreement” means a written agreement signed by Supplier and an authorized officer of Buyer (i.e., not a PO) that governs a specific purchase or supply transaction.
  • “Order” means a PO or Written Agreement.
  • “Customer” means a customer, consignee, job site, warehouse or other third party designated by Buyer to receive Products directly from Supplier.

1. ACCEPTANCE OF PURCHASE ORDER

1.1 Order. These T&C are incorporated into each Order as if fully set forth therein as a material inducement to Buyer to transact business with Supplier.

1.2 Offer. Each Order issued by Buyer constitutes an offer by Buyer to purchase the Products identified in the Order on the terms stated in the Order and these T&C.

1.3 Supplier Terms Rejected. Buyer expressly rejects any additional or different terms contained in Supplier’s quotation, proposal, acknowledgment, order confirmation, invoice, website, portal, electronic communication or other document. Such terms shall not modify the Order or these T&C unless expressly accepted in a written document signed by an authorized officer of Buyer.

1.4 Acceptance. Supplier accepts a PO by performing any of the following: (a) signing or acknowledging the PO; (b) commencing manufacture or other preparation or performance; (c) shipping or delivering Products; or (d) otherwise acting in a manner consistent with acceptance of the PO.

2. PRECEDENCE

2.1 Purchase Order Controls. In the event of any conflict or inconsistency between the Order and Supplier’s quotation, acknowledgment, invoice, standard terms, website terms, or other general terms and conditions, the Order controls. Supplier’s standard terms and conditions shall not become part of the agreement merely because they are attached to, referenced in, or included with a quotation, acknowledgment, invoice, shipment, electronic communication or other Supplier document.

2.2 Order of Precedence. In a transaction between Buyer and Supplier, the following order of precedence applies unless pursuant to a Written Agreement that provides otherwise:

(a) the Written Agreement, but only with respect to matters expressly governed by that agreement;

(b) the Purchase Order, including specifications and requirements expressly incorporated into the PO;

(c) these T&C; and

(d) any other document issued by Supplier, to the extent it is not inconsistent with the word and spirit of the above.

2.3 No Course of Dealing. Neither a course of dealing nor a course of performance shall modify the foregoing order of precedence unless Buyer expressly agrees to such modification by written agreement signed by an authorized officer of Buyer.

3. PRODUCTS AND SPECIFICATIONS

3.1 Supplier shall provide Products strictly in accordance with an Order, including all specifications, grades, formulations, concentrations, purity requirements, packaging requirements, samples, drawings and other requirements stated or incorporated in the Order.

3.2 Supplier shall not substitute a manufacturer, manufacturing location, source, grade, formulation, concentration, raw material, packaging configuration or other material characteristic of the ordered by Buyer without Buyer’s prior written approval.

3.3 Supplier shall maintain adequate lot and batch traceability for all Products supplied to Buyer.

3.4 Supplier shall promptly notify Buyer of any actual or anticipated change that could affect the quality, performance, availability, shelf life, regulatory status or other characteristic of Products specified in the PO.

4. PRICE AND CHARGES.

Unless Buyer specifies in a PO or agrees in a Written Agreement:

4.1 Prices shall not exceed what is specified in an Order.

4.2 Prices include all Supplier costs necessary to provide conforming Products, including packaging, labeling, loading and handling.

4.3 Supplier shall not impose fuel surcharges, raw-material surcharges, accessorial charges, price increases or other additional charges.

4.4 Supplier shall not increase the price of Products covered by Written Agreement or accepted PO.

5. TAXES

Supplier shall separately identify applicable sales, use or similar taxes on invoices where required by law. Buyer shall be responsible only for taxes that Buyer is legally obligated to pay and that are properly stated on Supplier’s invoice. Supplier remains responsible for taxes imposed on its income, property, payroll or operations.

6. DELIVERY

6.1 Supplier shall comply with the delivery date, location, quantity and transportation instructions in an Order at no additional cost to Buyer.

6.2 Time is of the essence and a material inducement to Buyer. This material term may only be modified by Buyer by Written Agreement.

6.3 In the event of delay:

(a) Supplier shall promptly notify Buyer of any actual or anticipated delay and shall provide the reason for the delay, expected revised delivery date and proposed corrective action; and

(b) Buyer may reject or cancel orders or quantities that are delivered or expected to arrive more than 24 hours beyond the scheduled delivery time.

7. SUPPLIER-ARRANGED FREIGHT.

Where Supplier is responsible for arranging transportation (FOB Desitnation):

7.1 Supplier shall select, qualify, and manage each carrier engaged to transport the Products. Supplier shall utilize only carriers that are properly licensed, registered, authorized, and insured; maintain all permits, registrations, endorsements, and operating authority required for the Products and mode of transportation; and comply with all applicable transportation, hazardous-materials, safety, security, and environmental laws and regulations. Supplier shall conduct reasonable due diligence before engaging a carrier and periodically thereafter to verify the carrier’s qualifications, safety and compliance status, insurance coverage, and applicable DOT/FMCSA and PHMSA authority and registrations. Where required by the nature or quantity of the Products transported, Supplier shall verify that the carrier holds a valid FMCSA Hazardous Materials Safety Permit;

7.2 Supplier shall remain responsible for loss of or damage to Products while in transit until delivery to the designated destination and completion of unloading. This material term may only be modified by Buyer’s PO or a Written Agreement;

7.3 Supplier shall be responsible for loss, damage, contamination, misdelivery or delay until delivery and acceptance, except to the extent caused by Buyer or the receiving party.

7.4 Supplier remains responsible for proper packaging, loading, securing, classification, labeling, placarding and transportation documentation regardless of which carrier it selects.

8. BUYER-ARRANGED FREIGHT.

Where Buyer arranges transportation (FOB Origin):

8.1 Buyer may select the carrier and transportation service provider.

8.2 Unless explicitly stated otherwise in a separate written agreement, risk of loss transfers to Buyer when conforming Products are properly tendered to Buyer’s designated carrier at the agreed pickup location.

8.3 Supplier remains responsible for the Products and for all conditions existing before tender to Buyer’s carrier, including proper packaging, loading, securing, classification, labeling, documentation and preparation.

8.4 Buyer’s selection of a carrier does not relieve Supplier of any obligation relating to Product conformity or Supplier-caused damage.

9. DROP SHIPMENTS AND CUSTOMER-DIRECTED DELIVERIES

9.1 Buyer may instruct Supplier to ship Products directly to a Customer, consignee, job site, warehouse or other destination designated by Buyer.

9.2 Direct shipment to a Customer constitutes delivery under Buyer’s PO and does not create a direct contractual relationship between Supplier and Customer.

9.3 Supplier shall continue to treat Buyer as the purchaser of the Products and shall not invoice, extend credit to, collect from, negotiate commercial terms with, or otherwise modify the commercial relationship with the Customer without Buyer’s prior written authorization.

9.4 Customer’s receipt, signature, unloading or use of Products does not waive Buyer’s rights concerning latent defects, contamination, shortage, nonconformity or breach of warranty.

9.5 If a Customer requests a material change to the Product, quantity, destination, delivery date or other commercial term, Supplier shall notify Buyer and shall not implement the change without Buyer’s written authorization.

10. CARRIER CHARGES; DETENTION AND DEMURRAGE

10.1 The party responsible for arranging transportation under a PO or Written Agreement shall be responsible for transportation charges.

10.2 Detention, demurrage, storage, re-delivery and other accessorial charges shall be borne by the party whose act or omission resulted in the need for such activities.

10.3 Supplier shall obtain Buyer’s prior written approval for extraordinary and unforeseeable transportation charges.

10.4 Buyer shall not be charged and shall not pay carrier charges resulting from Supplier’s failure to properly prepare, load, document or tender Products.

11. TRANSFER NOT ACCEPTANCE

Unless otherwise stated in the PO or Written Agreement, title and risk of loss transfer in accordance with the applicable delivery provision of these T&C. Neither the transfer of title nor the risk of loss constitutes acceptance of Products or waive Buyer’s rights concerning defects, nonconformity, shortage or breach of warranty.

12. INSPECTION AND ACCEPTANCE

12.1 Buyer has the right to inspect and test Products and accept or reject them within a reasonable period following receipt.

12.2 Buyer may reject Products that are defective, contaminated, damaged, short, late, improperly packaged, improperly documented or otherwise fail to conform to the PO, specifications or these T&C.

12.3 Payment, inspection, receipt, resale, use of a portion of a shipment or receipt by a Customer does not constitute acceptance of latent defects or waive Buyer’s remedies.

13. NONCONFORMING PRODUCTS.

13.1 If Buyer rightfully rejects a delivery or any Products due to unauthorized substitution, regulatory noncompliance nonconformance with the PO, Written Agreement, these T&C, applicable specifications, or applicable law, Supplier shall be deemed to have breached its obligations with respect to such rejected delivery or Products, and such rejected delivery or Products shall be deemed not to have been delivered or accepted. Without limiting any other rights or remedies available to Buyer, Buyer may, at its option:

(a) require Supplier to promptly replace the rejected Products, at Supplier’s sole cost and expense;

(b) require Supplier to repair, rework, or otherwise correct the nonconformance, where appropriate and acceptable to Buyer, at Supplier’s sole cost and expense;

(c) require a refund or credit, at Buyer’s option, for all amounts paid or payable with respect to the rejected Products;

(d) require Supplier to promptly retrieve the rejected Products at Supplier’s sole cost and expense or reimburse Buyer for all reasonable costs and expenses incurred in connection with the inspection, handling, storage, return, transportation, lawful disposal, marketing, or resale of the rejected Products;

(e) purchase substitute or replacement Products from another source and recover from Supplier the reasonable additional costs incurred by Buyer in obtaining such replacement Products, together with any other incidental or consequential damages recoverable under the PO, Written Agreement, these T&C, or applicable law, including reasonable charges, penalties, or other amounts imposed upon Buyer by its Customers to the extent directly resulting from Supplier’s delivery of nonconforming Products; and/or

(f) exercise any other right or remedy available to Buyer under the PO, Written Agreement, these T&C, or applicable law.

Supplier’s replacement, repair, correction, refund, or other cure of rejected Products shall not limit or waive Buyer’s right to recover damages or exercise any other remedy arising from Supplier’s nonconformance.

13.2 Supplier shall bear reasonable transportation, handling, testing, disposal, rework, replacement and other costs attributable to Supplier’s nonconforming Products.

14. WARRANTIES

14.1 Supplier warrants that all Products:

(a) conform to the specifications, samples and other applicable requirements set out in a PO or Written Agreement;

(b) are merchantable and fit for their ordinary intended purpose;

(c) are free from defects in material, manufacture and workmanship;

(d) are not adulterated, contaminated or misbranded;

(e) are manufactured, packaged, labeled, stored and transported in compliance with applicable law;

(f) are accompanied by accurate SDS, COA, labels and other required documentation; and

(g) do not infringe third-party intellectual property rights, except to the extent infringement results solely from specifications or designs supplied by Buyer.

14.2 For Products purchased for resale, Supplier additionally warrants that the Products conform to applicable manufacturer specifications.

15. CERTIFICATES, SDS AND PRODUCT DOCUMENTATION

15.1 Supplier shall provide current and accurate SDS, COAs, certificates of conformity, product specifications, lot or batch information, country-of-origin information and transportation documentation required by PO, Written Agreement and applicable law.

15.2 Documentation shall accompany the Products and be delivered to Buyer electronically in advance.

15.3 Supplier shall promptly notify Buyer of any change to an SDS, hazard classification, regulatory status, Product specification or other material Product documentation.

16. REGULATORY AND PRODUCT SAFETY COMPLIANCE

16.1 Supplier shall comply with all applicable laws and regulations relating to the manufacture, handling, packaging, labeling, storage, sale and transportation of Products.

16.2 For hazardous materials, Supplier shall properly classify, package, mark, label, placard and prepare Products for transportation and shall provide all required hazard, emergency and safe-handling information.

16.3 Supplier shall promptly notify Buyer of any recall, regulatory action, restriction, warning, prohibition, registration issue, safety issue or other event that could affect Products supplied or scheduled for delivery.

17. PRODUCT RECALLS AND CUSTOMER CLAIMS

17.1 Supplier shall promptly notify Buyer of any known or suspected defect, contamination, regulatory issue, recall, withdrawal, field complaint or corrective action involving Products supplied to Buyer.

17.2 Supplier shall cooperate fully with Buyer in investigating and resolving such matters.

17.3 To the extent attributable to Supplier or its Products, Supplier shall bear Buyer’s reasonable costs associated with recall, withdrawal, replacement, disposal, testing, rework, transportation and related Customer claims.

18. INDEMNIFICATION.

Supplier shall defend, indemnify and hold harmless Buyer, its affiliates and their respective officers, directors, employees, agents, representatives and Customers from claims, liabilities, damages, penalties, costs and reasonable attorneys’ fees to the extent they result from or relate to:

18.1 Supplier’s breach of the PO, these T&C or a Written Agreement;

18.2 defective, contaminated, adulterated, mislabeled or otherwise nonconforming Products;

18.3 the negligence or willful misconduct of Supplier or a carrier selected by Supplier;

18.4 violation of applicable law by Supplier or a carrier selected by Supplier;

18.5 failure to comply with hazardous-material or transportation requirements by Supplier or a carrier selected by Supplier;

18.6 bodily injury, death or property damage attributable to Products or the conduct of Supplier or a carrier selected by Supplier;

18.7 recalls or withdrawals attributable to Supplier; or

18.8 infringement of third-party intellectual property rights.

19. INSURANCE

19.1 Supplier shall maintain insurance appropriate to its operations and the Products supplied, including commercially reasonable commercial general liability, product liability, automobile liability and workers’ compensation/employer’s liability coverage as applicable.

19.2 Upon request, Supplier shall provide evidence of such insurance. Supplier’s insurance shall not limit its contractual liability or indemnification obligations.

20. CONFIDENTIALITY AND INTELLECTUAL PROPERTY

20.1 Supplier shall protect Buyer’s confidential information, including formulas, specifications, pricing, forecasts, Customer information, manufacturing information and other non-public business information.

20.2 Supplier shall use such information solely to perform its obligations to Buyer and shall not disclose it except to personnel or approved subcontractors with a need to know and appropriate confidentiality obligations.

20.3 Buyer retains all right, title and interest in Buyer-provided formulas, specifications, drawings, trademarks, data and other intellectual property.

21. FORCE MAJEURE

21.1 Neither party shall be liable for delay or failure to perform caused by events beyond its reasonable control, including acts of God, fire, flood, unforeseeable adverse weather conditions, epidemic, war, terrorism, civil disturbance, labor disruption, transportation interruption, utility failure or governmental action (“Force Majeure”).

21.2 The party whose performance is delayed or prevented by Force Majeure shall promptly notify the other party and use commercially reasonable efforts to mitigate the effects and resume performance.

21.3 Supplier’s avoidable inventory shortage, inadequate sourcing, poor planning or failure to maintain reasonable supply arrangements do not constitute Force Majeure.

21.4 Force majeure does not relieve Supplier of obligations relating to Products already manufactured and committed for shipment or relieve Buyer of its obligation to pay for conforming Products properly delivered and accepted.

22. CANCELLATION, SUSPENSION AND TERMINATION

22.1 Buyer may cancel or modify a PO before shipment or manufacture, subject to any cancellation terms expressly stated in the PO or Written Agreement.

23. LIMITATION OF BUYER LIABILITY

To the maximum extent permitted by law, Buyer shall not be liable to Supplier for special, incidental, consequential, exemplary or punitive damages, lost profits, lost revenue, loss of business, loss of goodwill or business interruption arising from or relating to a PO or these T&C.

24. GOVERNING LAW AND DISPUTES

24.1 Each Order (including these T&C) shall be governed by the laws of the State of Texas, without regard to conflict-of-law principles.

24.2 The parties shall first attempt in good faith to resolve any dispute through business-level discussions.

24.3 If a dispute is not resolved within thirty (30) days after written notice of the dispute, either party may pursue available remedies in a court of competent jurisdiction located in Harris County, Texas, unless a Written Agreement provides otherwise.

25. ASSIGNMENT AND SUBCONTRACTING

25.1 Supplier shall not assign, delegate, subcontract or transfer a PO or any material obligation without Buyer’s prior written consent, except for use of ordinary qualified carriers in performing transportation obligations.

25.2 Supplier remains responsible for its subcontractors, carriers and other service providers.

25.3 Buyer may assign a PO to an affiliate or successor in connection with a reorganization, sale or transfer of the applicable business or assets.

26. WAIVER; SEVERABILITY; SURVIVAL

26.1 No waiver of any provision or breach shall constitute a waiver of any other provision or later breach. A purported waiver is only enforceable against Buyer if in a writing signed by an authorized officer of Buyer.

26.2 If any provision is held invalid or unenforceable, it shall be modified to the minimum extent necessary to make it enforceable, and the remaining provisions shall remain in effect.

26.3 Provisions concerning payment, warranties, indemnification, confidentiality, intellectual property, claims, recalls, limitations of liability and other obligations that by their nature should survive shall survive termination or expiration.

27. ENTIRE AGREEMENT; AMENDMENTS

27.1 An Order, including these T&C and applicable specifications, constitutes the complete agreement between Buyer and Supplier regarding and governing the purchase of Products.

27.2 No amendment, modification or waiver of an Order shall be effective unless made in writing and authorized by Buyer.

27.3 Supplier’s invoice, acknowledgment, quotation, website terms, portal terms or other document shall not amend an Order unless expressly accepted in a writing signed by an authorized officer of Buyer.

28. ELECTRONIC TRANSACTIONS AND RECORDS

28.1 Electronic POs, acknowledgments, invoices, records, communications and signatures may be used and shall have the same effect as paper documents to the extent permitted by law.

28.2 Supplier shall maintain records sufficient to establish the identity, quantity, lot/batch, manufacture, shipment, quality and regulatory status of Products supplied to Buyer for the period required by applicable law or the PO.

Terms and Conditions